arjo Enterprise ENT-ACC02 Mode D'emploi page 3

These accessories are designed to support fluid bags and other IV equipment on the Arjo
Enterprise 5000, 5000X, 8000, 8000X, 9000, 9000X, Citadel and Citadel Plus Medical
Beds.
Model ENT-ACC02 has a straight pole and model ENT-ACC04 has an angled pole. Model
ENT-ACC02-SH has steel hooks allowing for a higher Safe Working Load.
All models have two hooks as standard. ENT-ACC02 and ENT-ACC04 can be increased
to four hooks if required by fitting accessory ENT-ACC14.
Refer to the bed instructions for use to confirm compatibility before using this
accessory.
Do not exceed the maximum Safe Working Load of 2kg on each hook (5kg for ENT-
ACC02-SH).
If a serious incident occurs in relation to this medical device, affecting the user, or
the patient then the user or patient should report the serious incident to the
medical device manufacturer or the distributor. In the European Union, the user
should also report the serious incident to the Competent Authority in the member
state where they are located.
ENT-ACC02, ENT-ACC02-SH and ENT-ACC04 IV poles
WARNING
1
English