Conformity Declaration - Rupes SLP41A Notice D'emploi Et D'entretien

Masquer les pouces Voir aussi pour SLP41A:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
op SLP41A- SO210AP_mag2015:SLP41A.qxd
NOISE / MEAN ACCELERATION VALUE
The noise level produced and themean quadratic
accelerationvalue are measured according to regulation
UNI EN ISO 15744 - EN ISO 28927.
Sound pressure level / Sound power level
L PA
dB(A)
SLP41A
86
210AP
86
Danger! The indicate measurements refer to new power tools.
Daily usacauses the noise and vibration values to change.
Use ear protection!
Displayed emission values are comparative and are to be em-
ployed for a provisional assessment of the operator's risk exposu-
re during the work period. Appropriate evaluation of work period
must also include tool's idle and stop periods.These emission va-
lues represent the tool's main applications.If the tool is used for
other applications, with other accessories,or if it does not under-
go regular maintenance, emission valuescan significantly increa-
se during operations.
DISPOSAL
At the end of its useful life, the product must not be released into
the environment or thrown away as domestic waste, but must be
disposed of at authorised recycling centres (contact the relevant
local authorities for a list of places where the product may be
disposed of according to the law). Disposing of the product
correctly contributes to protecting human health and
safeguarding the environment. Any illegitimate disposal of the
product will be punishable by law.
3 axis vibration level
L WA
Uncertainty
a h
Uncertainty
m/s
2
97
3
5,5
97
3
5,5
11/05/2015
11.36

CONFORMITY DECLARATION

We declared on our responsability that the hand-held non-electric
power tool, which is mentioned in the present operating manual, is in
comformity with the Essential Requirements of Safety of the following
Directive:
2006/42/CE Machinery
The tests have been carried out in accordance with following Standards:
1,5
UNI EN ISO 11148-8:2012 - UNI EN ISO 15744 - UNI EN ISO 28927
1,5
Technical file at:
RUPES S.p.A.
Via Marconi, 3A
20080 VERMEZZO (Mi) - Italy
Vermezzo (MI), 03/02/2014
Pagina 11
S.p.A
IL PRESIDENTE
G. Valentini
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

So210ap

Table des Matières