Table des Matières
Publicité
ENGLISH
BATTERY REMOVAL
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled correctly.
•
The rechargeable battery must be removed from the appliance before it is scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Ensure the device is discharged of all power. To do this, switch it on and allow it to run
until it stops.
2.
Pull off the shaver head assembly.
3.
Unscrew the screw on the top of the unit.
4.
Pry off the upper decorative panel.
5.
Pry off the two decorative side panels.
6.
Unscrew the 6 screws on the inner housing
7.
Pry off the inner housing to expose the printed circuit board.
8.
Take out the printed circuit board assembly.
9.
Disconnect the battery from the circuit board.
•
The battery is to be disposed of safely.
•
Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
Publicité
Table des Matières
