Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
, CLEANING CAUTIONS
•
Ensure the appliance is switched off and unplugged from the mains before
cleaning.
•
Open the shaver head by pressing the release button on the front of the
shaver (Fig. A).
•
Locate the centre arrow and slide the carrier away from the arrow to release
(Fig. C) and toward the arrow to snap back in place (Fig. G).
•
Pull the inner cutter carrier away from the inner cutters (Fig. D).
•
Thoroughly brush hairs from the inner and outer cutters. Rinse out
remaining debris (Fig. E).
•
Place the inner cutter carrier back into position and lock into place (Fig.
F-G).
•
Align the spring hinge into the slot at the back of the hair pocket and press
into place. Snap the head assembly closed.
•
Please note this product is suitable for use in the bath or shower.
, Caution: Keep the adaptor and cable dry.
, CLEANING TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
, DANGER: Once the shaver has been dismantled for disposal, do not attempt
to reassemble and/or use.
•
Unplug the shaver.
•
Using a small screwdriver, pry the front cover from the shaver (Fig. H).
•
Remove the rear cover (Fig. I).
•
Remove the 4 screws located on the front of the shaver (Fig. J).
•
Pry the battery carrier and circuit board from the shaver body then cut the
wires (Fig. K-L).
•
Dispose of the battery properly.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
6
Publicité
Table des Matières
