Battery Removal - Remington Flex360 Mode D'emploi

ENGLISH
, CLEANING THE POP-UP TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• Unplug the shaver.
• Run the shaver until the motor stops.
• Remove the head from the shaver (pull head up and off ).
• Remove the screw that is exposed when the head is removed.
• Using a small screwdriver, pry the front cover from the body.
• Using a small screwdriver, pry both side covers from the body.
• Remove 4 screws located on the front of the shaver along the outside edge.
• Using a small screwdriver, pry up the newly unsecured front inner housing.
• Remove 3 screws that were newly exposed on front.
• Using a small screwdriver, pry up the newly unsecured inner back housing to
expose the battery.
• Pry the battery free from the circuit board.
• Dispose of the battery properly.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
9