Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
List of commands that can be sent
to the programmable thermostat via text message
Default text message
Request thermostat status
# 01 <STATUS ?>
Setting AUTOMATIC mode
# 02 <AUTO>
Setting WILDCARD mode
# 05 <JOLLY>
Setting MANUAL mode
and the desired temperature*
# 04 <MAN> = xx.x
*Manual mode also requires you to set the tem-
perature where "xx.x" represented the desired/
detected temperature (for example 24.7)
Setting the season mode to SUMMER
# 06 <SEASON = SUMMER> # 06<...>
Setting the season mode to WINTER
# 07<SEASON = WINTER> # 07<...>
Setting FROST PROTECTION mode
# 16 <FROST PROTECTION> # 16<...>
Switching off the system
# 03 <SYSTEM = OFF>
To reactivate a programmable thermostat that is in FROST PROTECTION or OFF mode,
you need to send two different messages: one that specifies the season (SUMMER-
WINTER) and one that activates the desired mode (AUTO - JOLLY - MAN).
Customised text
message
# 01 <...>
# 02 <...>
# 05 <....>
# 04 <...> = xx.x
# 03<...>
Confirmation text message from
TH/450 GSMGSM
MODALITÁ = XXXXXX TEMP = xx.x,
Setting modes and temperature
detected
STAGIONE = XXXXXX,
Season setting detected
ANTIGELO = xx.x,
Frost protection temperature setting
detected
PRESENZA RETE
Mains status detected
STAGIONE ESTATE TEMP = xx.x
STAGIONE INVERNO TEMP = xx.x
STAGIONE ANTIGELO TEMP = xx.x
IMPIANTO OFF TEMP. = xx.x
Publicité
Table des Matières
