Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B
C
The program composed in this way is activated immediately and remains active until the
set time runs out. The device then goes back to operating in the mode it was in before the
activation of the timed manual program.
To go back to AUTOMATIC operation before the end of the programmed time, press
Changing the temperature sensor calibration
If the device is in a position that means that it is difficult for it to detect the correct tem-
perature, it is possible to modify the temperature detected by ± 3 °C in increments of a
tenth of a degree.
A
TH450
Press
and use the
tons to set the desired activation
times B.
Press
again and use the
buttons to set the desired activa-
tion days C.
Activate MANUAL operating mode.
Press button P A.
but-
.
Publicité
Table des Matières
