D
Important warnings:
- Do not use a SIM from the "3" operator or a SIM with a data-only contract.
- You can see the GSM signal strength even in the absence of the SIM card (see "SIM
presence and GSM signal strength" chapter).
- Before inserting the SIM card into the programmable thermostat, it is advisable to
check it works correctly, by trying to send and receive a text message with the aid
of a mobile phone.
- In order to reduce battery consumption, when the programmable thermostat is de-
tached from the base, the display backlight is disabled and it is not possible to send
or receive text messages or change the date and time.
E
MICRO SIM
NANO SIM
In order to control the program-
mable thermostat remotely using
OK!
a mobile phone, it is necessary to
insert a SIM CARD (not included)
NO!
in the designated slot D.
The SIM card must have the fol-
lowing characteristics:
- it must have a PAYG contract or
subscription,
- it must be enabled for telephone
traffic and receiving text mes-
sages,
- the PIN code request must be
disabled.
In order to guarantee device op-
eration in the event of a temporary
interruption to the mains power
supply, insert 3 x RECHARGEABLE
NiCd/NiMH AAA 1.2 V batteries
(not supplied) in the designated
slot, respecting the polarities
indicated on the bottom E.
Incorrect positioning of the
batteries may damage the unit.