Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
N.B. During programming, the clock shows the time indicated by the flashing segment.
The colon between the hours and minutes does not flash and the temperature indication
shows the value of the selected level.
C
TH450
D
TH450
E
TH450
F
TH450
C buttons, select
Using the
the desired temperature range;
then press the 0÷23
move to the next hour and select
the desired temperature D.
Continue the same way until
reaching 23:00.
Programming is complete for
Monday.
To copy the set program to other
days of the week, press C E.
If you continue to press C , the
program created is copied to the
days indicated in turn by the flash-
ing segment.
To program the subsequent days
in a different way, move the day
forward using the 1÷7 button and
repeat the procedure described
above F.
button to
Publicité
Table des Matières
