Orbegozo CP 72120 Manuel D'instructions page 11

CP 72120
a minimum contact separation of 3 mm.on all
poles.
2. Make sure that when the fan is fitted in the
chosen position, there is no possibility of the
rotating blades coming into contact with any
object. Blades should be at least 2.30 m from floor
when fan is hung.
3. If you are installing more than one ceiling fan
make sure that you do not mix fan blade sets,
even though they are from the same ceiling fan
model.
4. Before beginning, disconnect power by removing
fuse or turning off circuit breaker.
5. Once fan installation is completed make sure that
all connections are secure to prevent fan from
falling.
6. Fan must be turned off and stopped before
reversing fan direction.
7. Check that the means of fitting the fan to the
ceiling is capable of supporting the weight of the
fan when in operation. (Minimum 50Kg.).
OPERATING IN WARM WEATHER ("Forward")
Fan blows air downward. Medium speed for maximum effectiveness. In warm weather, this
allows you to reduce the use of your air conditioner, keeping the air circulating, which will help
you to keep cool.
OPERATING IN COLD WEATHER ("Reverse")
Fan blows air upward. Low to medium speed.
In cold weather air flows upward reducing the air current while it moves warm air off the ceiling.
The exact speed depends on the size of the room, number of fans, ceiling height, etc. This should
be fast enough to break the air stratification, but not too slow as no breeze will be generated.
11