Reading The Plc Indicator Light - Devolo Mesh WiFi 2 Manuel

18 Introduction

2.3.1Reading the PLC indicator light

The integrated PLC indicator light (LED) shows the
status for the devolo by illuminating and/or flas-
hing:
LED
1 Red LED
2 Red LED
devolo Mesh WiFi 2
Flashing be- Meaning
haviour
Lights up for Start-up process
up to 1 min.
Flashes at in- Status 1:
tervals of 0.5 The reset of the devolo Mesh adapter was
sec. (on/off) successful. The reset button has been pres-
sed and held for 10 seconds.
Status 2:
The devolo Mesh adapter (once again) has
the factory default settings. Since the last
reset, no pairing with another devolo Mesh
adapter has taken place.
Connect
devolo Mesh adapter to create a full-
fledged PLC network as described in
Chapter 2.3 Pairing – Establishing a PLC
connection.
the adapter with another
LED status display
(web interface*)
Cannot be disabled
Cannot be disabled