Devolo Mesh WiFi 2 Manuel page 104

48 Network configuration
4.7.1Status
Here you can view the most important information
on the devolo Mesh adapter, including the current
date and time, time zone, MAC address of the
adapter, status of the Wi-Fi and Powerline LEDs
and the two operating buttons.
4.7.2Management
System information lets you enter user-defined
names in the Device name (hostname) and
Device location fields. Both pieces of information
devolo Mesh WiFi 2
are particularly helpful if multiple devolo Mesh
adapters are to be used and identified in the
network.
Under Change access password, a login password
can be set for accessing the web interface.
By default, the built-in web interface of the
devolo Mesh WiFi 2 is
password. We recommend assigning a password
when the installation of the devolo Mesh WiFi 2 is
complete to protect it against tampering by third
parties.
To do so, enter the desired new password
twice. Now the web interface is protected
against unauthorised access with your cu-
stom password!
In Power Management, you can enable Power-
save mode and Standby
devolo Mesh WiFi 2.
If Powersave mode has been enabled, the
devolo Mesh WiFi 2 switches to PowerSave mode
automatically whenever reduced data transmis-
sion over ethernet is detected.
The latency (time for transmitting a data
packet) may be negatively affected.
not protected by a
mode on the