Commissioning Of The Machine - FUXTEC FX-MSP2.2 Mode D'emploi

Original-Bedienungsanleitung FUXTEC FX-MSP2.2_de_en_fr_ita_rev09

Commissioning of the machine

1. Change from liquid to granulate sprayer (e.g., salt)
Remove the side safety nuts (1) of the chemical tank and disassemble the tank
(see next step in fig.2. Remove the spray insert and insert the granule insert (2,
Fig.1).
Fig.1
5. Security screw
6. Granulate insert
7. Granule attachment
8. Cover
Disassembly of the chemical tank
2) Remove the lower cover "A" of the chemical tank, change the spray nozzle
connected to the rubber tube/hose, and screw on the cover "B." (Make sure that
the sealing ring is present to prevent the granules from leaking) as shown in Fig.
3.
Screw on the cover. Loosen the hoses (2+3) and the filter (5).
Fig. 2
3.Use of chemicals
4.Hose
3.hose
4.Filling filter
5.Cover
28