FUXTEC FX-MSP2.2 Mode D'emploi page 26

Original-Bedienungsanleitung FUXTEC FX-MSP2.2_de_en_fr_ita_rev09
5. Starting the machine
1) Switch the dust nozzle to the lowest position before starting the machine.
Otherwise, the chemical will be sprayed when you start the engine.
2) It is forbidden to stand at the front of the blow nozzle. Even if the spray nozzle
is closed, residues of the residual dust may be deposited on the tube.
6. Nebulizing / Fogging
1) It is recommended to use the device in cold weather. For example: in the early
morning or late afternoon. This can reduce the evaporation of the chemical and
thus improve the effect.
2) If your mouth or eyes contact the chemical, wash them out immediately with
water and see your doctor immediately.
3) If you have headaches or a dizzy spell, stop working with the machine and see
a doctor for safety reasons.
4) When preparing the pesticides, the user should follow the instructions on the
label.
5) It is forbidden to use special liquids, those with strong acids or lye, etc.
Safety symbols on the machine
WARNING: Improper operation can lead to
severe injuries!
Read this manual carefully to understand how to
use this device properly!
Please wear hearing protection during work!
26