Personal Precautions - Powerfist CUTPRO 20 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V1.1
3.
Wear thick clothes that do not expose the skin. Ultraviolet or infrared light
can burn skin with sufficient exposure.
4.
Do not wear clothing that can hold hot debris or sparks such as pant cuffs,
shirt pockets or boots. Choose clothing that has flaps over pockets or wear
clothing to cover the openings such as pant legs over the boots or an apron
over the shirt.
5.
Gloves shall should contain an insulating lining to protect against an
electric shock.
6.
Rubber soled footwear or electrically insulated work boots are
recommended while working with a plasma cutter. The non- skid sole is
will also help maintain footing and balance during work.
a.
Select boots with steel toe protection to prevent injury from falling
objects.
RESPIRATORS
1.
Respiratory protection is needed when ventilation is not sufficient to
remove welding fumes or when there is risk of oxygen deficiency.
a.
Wear a NIOSH approved respirator when working on materials that
produce dust or particulate matter.
2.
Work in a confined space only if it is well ventilated or while wearing an air-
supplied respirator. Welding fumes and gases can displace air and lower the
oxygen level causing injury or death. Be sure the breathing air is safe (See
Fumes and Gases).
3.
The user can take the additional precaution of informing another person in
the work area of the potential danger, so that person can watch for
indications that the user is suffering from oxygen deprivation.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Remove all jewelry or metal items from your person before welding. Metal
items may connect to the plasma cutter's electrical circuit, causing an
injury or death.
Visit www.princessauto.com for more information
20A Plasma Cutter
8901183
5

Publicité

Table des Matières
loading

Table des Matières