V1.1
5.
Use the lowest current setting possible during welding.
6.
Avoid long and regular bursts of energy while welding. Apply the
electrode in short strokes and intermittently. This will prevent the
pacemaker from interpreting the signal as a rapid heartbeat.
7.
Do not allow the electrode to touch the metal while welding.
8.
Keep the lead cable and ground cables on the same side of your body.
9.
Do not weld while carrying the welding power source.
10. Do not work next to, sit or lean on the welding power source.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the contents are included.
Contents:
•
Plasma Cutter Unit
•
4-metre pre-assembled torch assembly with 1 electrode
•
Ground Clamp and 3 m Cable
Visit www.princessauto.com for more information
20A Plasma Cutter
• 15/20 A Adapter
• Electrode (2)
8901183
• Nozzle (2)
15