Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.1
INTRODUCTION
The 20A Plasma Cutter is a portable, high-efficiency plasma cutter ideal for
cutting conductive metal in either 15/64 in. clean cuts or 25/64 in. sever cuts.
The cutter features dual-voltage sensing technology that allow the unit to
plug into any power supply with the included adapter. It also has thermal
overload protection.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions.
2.
Remove all unnecessary people from the work area when welding. Anyone
remaining in the work area must wear the appropriate welding safety
equipment.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach
of children.
4.
Do not weld on damp surfaces that can transmit the electric current.
5.
Do not install or use in the presence of flammable gases, dust or liquids.
6.
Welding sparks and ejected molten slag can start a fire. Remove
combustible materials within 39 ft (12 metres) of the plasma cutter. See
Fire and Explosion Precautions.
7.
Have a fire extinguisher readily available (see Fire and Explosion
Precautions).
8.
Use protective screens or barriers to protect others from flash and glare; warn
others in the area to look away from the arc.
9.
Keep the plasma cutter at least one foot from any wall or structure.
10. Check that the work area is free from fires, sparks or hot debris before
leaving.
Visit www.princessauto.com for more information
20A Plasma Cutter
8901183
3
Publicité
Table des Matières
