brennenstuhl Professional LINE TU 23050 M Mode D'emploi page 8

Types:
Mains plug:
Nominal voltage:
Power consumption:
Max. current:
Power factor:
Nominal voltage, socket:
Max. socket load:
Max. projected area:
Dimensions:
Dimensions of protective cover:
Weight:
This LED floodlight is suitable for indoor and outdoor lighting purposes.
Category 2 (K2) equipment: For use in harsh environments with high mechanical and thermal loads.
COMMISSIONING
Place the floodlight on a dry and level surface.
To switch on the 360° lights, press the button (fig. 1 A),
for the spotlight the button (fig.1 B).
Dimming the 360° light: Press the switch multiple times
to set the brightness to 100%, then 50%, then 25% and then "off".
If the switch is left in any of its "on" positions for longer than
5 seconds, then pressing it once again will always turn it off.
8 www.brennenstuhl.com
011521 BA_proLINE Mob. 360°-Strahler TU 23050_23051 0533134.indd 8 011521 BA_proLINE Mob. 360°-Strahler TU 23050_23051 0533134.indd 8
TU 23050 M / TU 23051 M
Schuko
220-240 V~ 50/60 Hz
360° light = 200 W
Spotlight = 30 W
1.5 A
>0.9
220-240 V~
3000 W
2179 cm
2
525 x 430 x 1300 mm
Ø 120 x 800 mm
10.3 kg
B
A
Fig.1
06.09.21 10:01 06.09.21 10:01