Assemble Armbar - Nuna pepp luxx Manuel D'instructions

Attaching and detaching the canopy
1 Adjust handle to fully extended position.
2 Find the holes on the upper inside of the seat back sides.
3 Insert canopy mount through the hole and into the bracket on the under
side of the handle on both sides.
4 Attach the snaps on the rear of the seat back.
5 To detach canopy, pull inwards on canopy mounts until they slide out.
Adjusting the canopy
1 To open the canopy, pull canopy towards front. To fold the canopy, push
canopy towards back.
2 Position the eyeshade forward or backward as needed.
3 To provide more air flow, tuck the back canopy flap into the pocket on
the underside of the canopy.
4 Unzip the zipper on the front of the canopy to reveal the Dream Drape
(14)
. The Dream Drape can be pulled out to provide additional cover.

Assemble Armbar

1 Align the armbar ends with the armbar mounts, and then insert to lock.
(15)
Please ensure that the seat fabric is not caught in the arm bar
attachment mount.
2 To disassemble armbar, press armbar release button
pull out the armbar.
13
(10)
(13)
(16)-2
(8)
(9)
(11)
(12)
(16)-1
, and then