The Control Unit - Megasat Seaman 37 Mode D'emploi

2. Installation
2.2 The contron unit
Main power
USB connection for
Firmware Update
Connection
for antenna
Connection
for set-top box
Warning:
Connect the device only at a 7 amp protected line.
The line must be at least 2.5 mm² strong. (never directly to the car battery).
06
Satellite selection
Display
LED displays
(PWR = Power)
(SEARCH = Searc)
(LOCK = Signal detected)
(ERR = Error)
Port for
Service
ENGLISH
(up / down)
Tracking function
(Disables automatic
tracking of the
antenna)
Power supply
12 V / 24 V
Reset