Safety Instructions - swissflex _85RF Mode D'emploi

Health and comfort
Welcome to the world of Swissflex!
Your Swissflex _85RF/_85RF bridge
product. If you follow the simple operating and safety
instructions, it will function to your complete satisfac-
tion for many years. In addition to its many other ad-
vantages, your _85RF/_85RF bridge
turbed sleep environment. All electrical connections
between the mains plug and the bed are virtually free
of mains voltage (below 0.5 watts) thanks to EcoTec.

Safety instructions

This device can be used by children
aged 8 and above and by people
with reduced physical, sensory or
mental capabilities or people lack-
ing experience and knowledge,
provided that they are supervised
or have been instructed in the safe
use of the device and understand
the dangers that may arise. Chil-
dren must not play with the device.
Cleaning and user maintenance
must not be carried out by children
without supervision.
CAUTION! The
bridge and accessories must
®
be protected from rain and other
moisture to prevent causing a fire
hazard or the risk of electric shock.
In case of spillages on an acces-
sory, the mains cable must be dis-
connected from the power out-
let and checked by your Swissflex
stockist.
When installing the slat base, en-
sure that the head, back and foot
sections are not obstructed by fur-
niture.
EN
is a Swiss quality
®
offers an undis-
®
_85RF/_85RF
Ensure that the mains supply is
disconnected before any assembly
or disassembly work is carried out
on the slat base or the bed frame.
Do not connect any devices to the
user socket (32) that could endan-
ger persons or damage objects
when the socket is turned on by re-
mote control, in particular electri-
cal tools such as saws, drills and
similar (risk of injury) or portable
heating devices (risk of fire).
Never place the mains cable be-
tween the user socket (32) and
the bed in such a way that the ca-
ble insulation could be damaged by
sharp edges or twists. Never feed
the cable through the adjustment
mechanism.
In the case of damage to cables to
the control housing or to the user
socket (32), do not adjust the bed
to a seated position. Remove the
mains plug from the socket and in-
form your stockist.
Never open the user socket hous-
ing (32) to which the cables are
connected. If you interfere with any
electrical part of the user socket
(32), the guarantee entitlements
will no longer apply.
Handle the _85RF/_85RF bridge
Operating instructions
®
21