Maintenance Schedule - Campbell Hausfeld CE7000 Serie Instructions D'utilisation

Operating Instructions
Maintenance (Continued)
CoMponenTS
Turn off all power and clean the cylinder
head, motor, fan blades, air lines,
intercooler and tank on a monthly basis�
belTS
Lock out and tag the
power then release all
pressure from the tank to prevent unexpected
movement of the unit.
Check belt tension every 3 months�
Adjust belt tension to allow 3/8 inch to
1/2 inch deflection with normal thumb
pressure� Also, align belts using a straight
edge against the face of the flywheel and
touching the rim on both sides of the
face� The belts should be parallel to this
straight edge (see Figure 20). Dimension
A should be the same as B and C to ensure
proper alignment of the belts�
Slots in the bed-plate allow for sliding
the motor back and forth to adjust belt
tension�

MAinTenAnCe SCHedule

operation
Check Safety Valve
Drain Tank (see Figure 16 or Figure 17)
Check Oil Level
Clean or Change Air Filter
Check Intercooler
Clean Unit Components
Check Belt Tightness
Change Oil (see Figure 14)
14 www.CH-Commercial.com
Air Compressor
Flywheel
Straight Edge
figure 20 - Top view
Motor
A B
Setscrew
daily Monthly
l
l
l
l
l
l
Motor Drive
Pulley
C
3 Months
l
l