How To Use - Hamilton Beach ChefPrep 3 Manuel D'utilisation

840130400 Ev01.qxd 1/12/05

How to Use

1. Read "Chopping Tips."
2. Make sure chopper is unplugged.
Lock bowl onto base by aligning
bowl handle on right side of the
base. Turn clockwise until bowl
locks into place with handle toward
front. (See Illustration A.)
3. Place blade in bowl over center
shaft. Turn until blade slips down to
bottom of bowl. Blade is sharp;
handle carefully.
4. Place food in bowl.
5. Place cover on bowl and rotate
clockwise until interlock tab locks
into tower. (See Illustration B.)
6. Plug into electrical outlet.
7. To turn unit on, press and hold the
Pulse button for continuous
operation. To Pulse, press and
release the Pulse button.
8. Remove cover. Unlock bowl by
turning counterclockwise.
Remove bowl from base.
Carefully remove blade. Blade is sharp; handle
carefully.
9. Unplug unit from outlet when not in use.
IF CHOPPER DOES NOT START : Review the steps in "How
to Use" to make sure the bowl and cover are both in the
locked positions.
10:51 AM Page 4
Illustration A
Illustration B
4
Features
Cord Storage
The base of the food chopper is
recessed to provide cord storage.
Remove bowl and spatula from base.
Turn the base upside down and wind
the cord as shown.
Spatula
For easy preparation and cleanup, the
spatula stores on the back of bowl on
the base of the food chopper.
Bowl Size Adjuster
(on selected models)
For improved chopping performance
and for chopping small quantities, place
the Bowl Size Adjuster on top of food
before processing.
5