Troubleshooting Guide - KitchenAid KESMK4 Manuel D'utilisation

REASSEMBLING THE PRODUCT
1
Follow the steps of disassembly to
assemble again. Press the Black rubber
frother component into the main housing.
Insert the Milk dispenser tube in place and
push upward and rotate until it clicks.

TROUBLESHOOTING GUIDE

Problem
If Steam and Hot water is
not getting selected:
If the problem is not due
to one of the above items:
If milk is not being
dispensed:
2
The Milk Frother Attachment may not be correctly attached in
place. Please refer to the "Product Assembly" section.
See the "Arranging for Service" chapter in the "Warranty and
Service" section. Do not return the Espresso Machine to the
retailer as they do not provide service.
The Milk hose and Milk hose connector may not be properly
assembled. Please refer to the "Product Assembly" section.
Replace the Decorative plate.
Insert and rotate the Froth level
adjustment knob in its place.
Replace the Function knob in its place.
Solution
9