3.3
Main applications / torque settings
Application
Sheet metal to sheet metal
Sheet metal to steel profile
Sheet metal to steel beam
Sheet metal to timber
Fiber-cement board on steel profile
Fiber-cement board on steel beam
Fiber-cement board on wood
Sandwich panel to steel profile
Sandwich panel to steel beam
Sandwich panel to wood
3.4
Items supplied
Metal construction screwdriver, STDG 17 depth guage, operating instructions.
4
Technical data
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Rated power input
Weight
Speed (running under no load)
Max. torque
Chuck
Protection class
5
Operation
5.1
Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1
Fitting the scaffold hook
1. Push the scaffold hook onto the tool from the front.
2. Turn scaffold hook into the desired position.
3. Secure the scaffold hook by tightening the knurled thumb screw.
378503
*378503*
Printed: 24.07.2018 | Doc-Nr: PUB / 5300847 / 000 / 03
Screw type
SMD
SMD
S-MS
S-MD 51 + S-MD 21
S-MD 53 + S-MD 23
SMP 52
S-MD 55 + S-MD 21
SMP 53
SMP 53
S-FD 03
S-FD 05
S-FD 01
SCD 63
SCD 65
SCDW 61
3
Diameter
in mm
4.2
4.8
4.8
5.5
5.5
6.3
5.5
6.5
6.5
6.3
6.3
6.5
5.5
5.5
6.5
ST 1800
600 W
1.9 kg
0 /min ... 1,900 /min
22 Nm
/
" hex socket
1
4
II
Torque
setting
1 - 2
1 - 8
1 - 8
8 - 13
6 - 11
4 - 12
2 - 7
8 - 14
14 - 18
6 - 12
12 - 15
12 - 18
2 - 7
2 - 9
5 - 8
English
5