Hilti ST 1800 Notice D'utilisation Originale page 8

▶ Make sure that the working area is well ventilated and, where necessary, wear a respirator appropriate
for the type of dust generated. Contact with or inhalation of dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust, such as oak and beech
dust, are classified as carcinogenic, especially in conjunction with additives for treating wood (chromate,
wood preservative). Materials containing asbestos may only be handled by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before starting work, check the working area for concealed electric cables or gas and water pipes. If
you damage an electric cable accidentally, external metal parts of the power tool may become live and
present a risk of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The power tool may go off course and
veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it down.
3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held electric screwdriver for fastening profile metal sheets, metal sheets
and sandwich panels in metal construction. The power tool is designed for driving and removing screws in
drywall installation work.
It is possible to use a stand-up tool extension for driving collated screws.
4 English
Printed: 24.07.2018 | Doc-Nr: PUB / 5300847 / 000 / 03
1
@
;
=
%
&
(
)
+
§
Chuck
Protective sleeve
Click connection between depth gauge and
power tool
Torque adjustment
Control switch lockbutton
Supply cord
Control switch
Forward / reverse switch
Depth gauge adjustment
378503
*378503*