Installation And Connection; Switching On/Off; Maintenance And Cleaning - Oase Fountain Ring LED Set Notice D'emploi

Installation and connection

• Position the transformer at least 2 m from the edge of the pond.
• Connect the connection cable of the spotlight to the socket on the transformer and hand-
tighten the union nut.

Switching ON/OFF

Switching on the unit: Plug the power plug of the transformer into the socket. The unit switches
on immediately.
Switching off the unit: Disconnect the transformer power plug.

Maintenance and cleaning

NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
 Clean the device only with clear water and a soft brush or sponge.
14
LED0017
LED0020