Yardworks 060-1330-4 Guide D'utilisation page 12

12
Compare the illustrations with your lawn mower to familiarize yourself with the locations of various controls
and adjustments. Save this instruction manual for future reference. Not every model of lawn mower will have
all these features.
Drive Control Lever (IF
EQUIPPED)
Used to engage self-
propelled front motion of the
lawn mower.
Starter Handle
Used for starting the engine or blade
(electric start models DO NOT have).
Electric start models only can be started
with the electric start key.
Grass Catcher
Height Adjuster
Used to adjust cutting height of the
lawn mower.
Mulch Door
Allows conversion to discharge or bagging operations.
NOTE: To convert to side discharge, install deflector.
Mulch/Discharge Guard
Operator Presence Control Bar
Must be held down to the handle to start the engine or engage
the blades. Release the bar to stop the blade/engine.
Deflector
Knobs
Discharge Cover
Discharge cover must be present and
closed if bag is not attached.
Engine Oil Cap with Dipstick
Gasoline Filler Cap
Housing
Front bumper handle can
be used to lift the mower
during transport.
Model Numbers:
060-1330-4 | 060-1331-2 | 060-1332-0 |
399-7898-4 | 399-7899-2 | 399-9898-2
®
/MD
Muffler
Air Filter
Omni wheel
(IF EQUIPPED)
Used to easy turning of
the mower.
Spark Plug