Vibration Information; Accessories; Noise Information - Worx WG583E Mode D'emploi

Blow speed
Vacuum capacity
Mulching ratio
Collection bag
capacity
Battery type
Battery capacity
Charger model
Charger rating
Charging time
(approx.)
Battery pack:
4.0 Ah (1 pc)
4.0 Ah (2 pcs)
Machine weight
14
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
*** Charger output 1 and output 2 mean two ports with
the same output voltage and current.

ACCESSORIES

Battery pack
Charger
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
Cordless Blower/Vac/Mulcher
Max. 335 km/h
Max. 575 m /h
3
12:1
35 L
Lithium-ion
4.0 Ah (WA3553)
WA3883
Input: 100-240 V~
50-60 Hz
Output 1: 20 V ,
2.0 A ***
Output 2: 20 V ,
2.0 A ***
1 hr
2 hrs
4.2 kg (Blow) 2.9 kg (Blow)
5.1 kg (Vac) 3.8 kg (Vac)
WG583E WG583E.9
2 (WA3553)
1 (WA3883)
L : 84.7 dB(A)
pA
L : 99.7 dB(A)
wA
K & K :
pA wA
Wear ear protection

VIBRATION INFORMATION

Typical weighted vibration
Uncertainty
/
/
The declared vibration total value may be used for
comparing one tool with another, and may also be used
/
in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
/
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
/
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
/
Maintain this tool in accordance with these
instructions and keep well lubricated (where
/
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
OPERATION
INTENDED USE:
The blower & Vac is intended for residential use only.
Use the blower outdoors to move or vacuum yard
debris as needed.
3 .0 dB(A)
a <2.5 m/s
2
h
K=1.5 m/s²
EN