Removing The Oven Door - Bosch BENCHMARK Serie Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour BENCHMARK Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. Pull the halogen bulb
from its socket.
Hint: If it is difficult to
grasp the bulb using
one hand, use both
forefingers to pinch
behind the rounded
part of the bulb, then
pull the bulb out using
both hands.
6. Replace the halogen
bulb. Grasp the new
bulb with a clean, dry
cloth. Align the bulb
prongs with the socket
holes and press into
place.
Hint: Direct finger
contact with the bulb
may cause premature
bulb failure.
7. Put the glass cover
back on by inserting it
into the mounting clip
and pressing the end
nearest you into the
housing until it locks
into place.
8. Turn power back on at
the main power supply
(fuse or breaker box).

Removing the Oven Door

9 WARNING
When removing the door:
Make sure oven is cool and power to the oven
has been turned off before removing the door.
Failure to do so could result in electrical shock
or burns.
The oven door is heavy and parts of it are
fragile. Use both hands to remove the oven
door. The door front is glass. Handle carefully to
avoid breakage.
Grasp only the sides of the oven door. Do not
grasp the handle as it may swing in your hand
and cause damage or injury.
Failure to grasp the oven door firmly and
properly could result in personal injury or
product damage.
To avoid injury from hinge bracket snapping
closed, be sure that both levers are securely in
place before removing the door. Also, do not
force door open or closed—the hinge could be
damaged and injury could result.
Do not lay removed door on sharp or pointed
objects as this could break the glass. Lay on a
flat, smooth surface, positioned so that the door
cannot fall over.
To remove the oven door:
To help avoid injury or
damage be sure to read
the above WARNING
before attempting to
remove the oven door.
1. Open the oven door to
its fully open,
horizontal position.
2. Flip levers on hinges
toward you.
Note: It may be necessary
to use a tool, such as a
screwdriver, to gently pry
the upper part of the lever
away from the housing.
Take care to avoid
scratching the housing.
English 28

Publicité

Chapitres

Table des Matières

Dépannage

loading

Table des Matières