Operating Instructions; Technical Specifications; Supplied Components; Charging The Battery Pack - Flex ALR 512 Notice D'emploi

Technical specifications

Order number
Visible laser diode
Laser class
Precision
Self-levelling range
(horizontal)
Range:
– With receiver FR44
– Without receiver
– Remote control
Speed of rotation
Operating duration
– ALR with NiMH battery:
– ALR with alkali battery:
– Receiver FR44:
Weight (ALR with battery
pack)
Dust/water protection
Temperature range
* depending on the ambient light

Supplied components

Rotational laser ALR 512 including battery
pack
Remote control including 9 V unit
FR44 receiver including batteries
Retaining clamp for receiver
Wall and floor support for ALR
18
Adapter for vertical application
Battery charger for battery pack
329.452 Battery housing for ALR
Transportation case
635 nm
2

Operating instructions

±1 mm/10 m
±5°
Before switching on the
power tool
Unpack the power tool and check that the
delivery is complete and not damaged.
< 600 m
Before using the power tool for the first time
approx.
– Charge the battery pack,
50 m*
– Insert the battery into the remote control,
approx.
– Insert the batteries into the receiver.
50 m*

Charging the battery pack

600/min
30 h If the LED (11) flashes, charge the battery
pack. While the power tool is operating with
60 h
the rotating laser beam, only the rotation
400 h
switches off, the laser beam remains on.
1.95 kg
n Connect the battery charger to the
n Connect the battery charger to the
IP 56
–20 °C.....
+50 °C
The charging time for a fully discharged
battery pack is approx. 12 hours. During the
charging process the power tool should be
switched off.
Mains mode
The power tool can continue to be used with
the battery charger in mains mode. To do
this, connect the battery charger as
described above.
Note
socket (5).
power supply.
The LED (6) is lit red.
Rotational laser