Electromagnetic Compatibility; Intended Use; Safety Instructions - Flex ALR 512 Notice D'emploi

Rotational laser

Electromagnetic compatibility

Although the power tool satisfies the strict
requirements specified in the relevant
directives, it cannot be excluded that the
power tool
– will affect other power tools
(e.g. navigation equipment on aircraft) or
– itself will be affected by high radiation,
resulting in a malfunction.
In these or other uncertain cases,
check measurements should be taken.

Intended use

This rotational laser is designed for industrial
applications.
The power tool is designed to determine,
transfer and check horizontal courses, vertical
lines, alignments, perpendicular points and
right angles, e.g.:
– to transfer metre and height cracks,
– to mark partition walls (vertical and/or
at a right angle) and
– to align equipment and controls in three
dimensions.
The power tool is authorised for outdoor use.

Safety instructions

Danger!
– Keep children away from laser power
tools.
– It is not permitted to tamper with or
change the power tool. Do not disable
safety devices and do not remove
information and warning signs.
– Before switching on the power tool,
check for visible damage. Do not switch
on damaged power tools.
– Have the device repaired or calibrated by
authorised technicians only. If the power
tool is opened without authorisation,
laser radiation may be emitted which
exceeds class 2.
– Do not use the power tool in an explosive
environment.
– If carrying out alignment work on ladders,
avoid an abnormal posture. Ensure that
you have a secure footing and keep your
balance.
Damage to property!
– If the power tool is brought from a cold to
a warm environment or vice versa, leave
the power tool to acclimatise before
using it.
– If using adapters and tripods, ensure that
the power tool has been firmly screwed
down.
– Before packing the power tool in the
transportation case, dry the power tool
and accessories with a cloth.
– Transport the power tool in the
appropriate transportation case only.
– If shipping the power tool or disconnec-
ting it for a prolonged period, isolate the
batteries or take them out of the power
tool.
Damage to the environment!
– Dispose of power tool, battery packs and
batteries in accordance with the currently
valid national directives. If in doubt,
contact the manufacturer or supplier.
15