Start; Preparation Time; Interrupt Or End Tanning Session - SOLTRON XXL-105 ULTRA POWER Instructions De Service

Operation
24/64
6.5
The device is started automatically with an internal or external timer.
6.5.1
Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the START/STOP button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
07521 / 2
– Press the START/STOP button.
Settings on start-up:
UV lamps

Facial tanner

Body cooling

Facial cooling

Audio system (optional)

6.5.2
The tanning session ends automatically after the preset time has run down.
The internal body cooling fan continues to run for approx. three (3) minutes to
sufficiently cool the device.
– To interrupt a tanning session, press and hold button START/STOP any-
time during a session.
– Press START/STOP again to restart the lamps.

Start

NOTE:
Timer instructions see separate manual
(order no. 1008370-..).

Preparation time

Interrupt or end tanning session