Cleaning Or Replacing Uv High Pressure Lamps And Filter Panels - SOLTRON XXL-105 ULTRA POWER Instructions De Service

1
2
3
1006724-02
03/2014
– Fix the panel into place.
The assembly is the same process in reverse order.
15172 / 0
7.7.3
– Release the clamping holder.
– Lift the filter panel, pull it out of the guide and remove it.
4
07570 / 0
Cleaning or replacing UV high pressure
lamps and filter panels
WARNING!
Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
NOTE:
The mounting bracket for the filter panel can be located
above or below.
NOTE:
Do not interchange the filter panels.
The facial tanner and the body tanner are equipped with
different filter panels.

Facial tanner (1):
Ultra Performance 512 (blue), order no. 1500980-..

Body tanner (2):
Ultra Performance 511, order no. 1001069-..
Cleaning and maintenance
Operating instructions – 37/64