Cleaning; Disinfection; Cleaning Of Surfaces - SOLTRON XXL-105 ULTRA POWER Instructions De Service

Cleaning and maintenance
28/64
7.3

Cleaning

WARNING!
Infections can be transferred through skin contact.
All items/equipment components, with which the user can
come into contact during tanning, must be disinfected after
every tanning session:
– Protective goggles
– Acrylic panel
– Handles and control panel
– MP3 cable
– Adjustable air nozzles
– Use only approved cleaners to disinfect the tanning
system and its components.
7.3.1

Disinfection

For hygienic proper disinfection, use a specially developed disinfectant clean-
er (such as Lucasol).
NOTE:
For thorough disinfection, the product must be allowed to
remain in contact with the surface being disinfected for a
specified amount of time. Follow the manufacturer's instruc-
tions for use.
7.3.2

Cleaning of surfaces

Acrylic panel
CAUTION!
Do not rub with a dry cloth – danger of scratching!
– For hygienic proper cleaning of acrylic surfaces, use a
specially developed disinfectant cleaner.
Other cleaning agents, especially concentrated disin-
fectants or solvents (e.g. Lysoform, ethyl alcohol or oth-
er liquids containing alcohol) must never be used for
cleaning.
Failure to observe this voids all warranty claims.
CAUTION!
Acrylic panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.