Artweger ARTLIFT Guide D'utilisation Et D'entretien page 18

ARTLIFT
1.)
Set the locking unit to "shower positi-
1
on" (fig. 1) – The door is not locked, the
tub drain is open.
2.) By pulling the end of the handle upwards
(fig. 2) you can open the door inwards. Get into
the tub.
3.) When the shower door is closed it automati-
cally fits into place and remains fixed in this
position.
2
4.)
Set the locking unit to "bath position"
(fig. 3). Now the door is locked and it
cannot be opened. At the same time the drain
is shut off and you can fill the bathtub. Fold the
seat up. You can now use the seat lift as a
backrest.
5.)
After bathing set the locking unit back to
3
"shower position" (fig. 1). The drain is
open again, the water can run out and the
door is unlocked.
ATTENTION: Wait until all the water has
run out before opening the door!
BATHING
WITH THE ARTLIFT
SEAT LIFT
AS BACKREST
18