Operation - Dexter 20VID3-60BLA.1 Mentions Légales & Consignes De Sécurité

6.OPERATION

Note: Before your operation, you need buy matching battery pack.
Push battery pack into the bottom of the handle ( until click )
Remove the battery pack by pressing the release button on the battery pack and by pulling the
battery pack out.
1
Inserting drill bits / screwdriver bits
. Hold the back section of the chuck and rotate the front section of the chuck(unlock direction)
. Insert the drill bit / screwdriver bit into the chuck.
. Tighten the chuck by hand(Hold the back section of the chuck and rotate the front section
chuck(lock direction)) and check if the drill bit/ screwdriver bit is clamped firmly in the chuck.
. Select the correct screwdriver bit to avoid damaging the screw when screwing function.
1
1
2
2
Chuck
Torque selector
3
1. Impact drill
2. Battery pack(not include)
3. Release button
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
2
213