Sony KP-57WV600 Manuel D'utilisation page 267

Notes on Using This Connection
To Do This ...
Watch the VCR
Watch cable channels
Set up the TV remote control
to operate the VCR
Activate the TV remote
control to operate the VCR
Control VCR functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Press TV/VIDEO repeatedly to select the cable input (VHF/UHF in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 51-52.
Open the outside cover, as shown on page 50. Then set the A/V slide switch
to the position you programmed for the VCR.
See "Operating a VCR" on page 53.
See the instructions for setting up Video Labels on pages 83-84.
27