Technical Data; Guarantee And Customer Service; Environment Friendly Disposal - emerio SEW-121820.1 Mode D'emploi

Stitches are too loose or
uneven.
Needle breaks.

TECHNICAL DATA:

Adapter input: 100-240 V AC, 50/60 Hz, 0.35A
Adapter output: 6 V DC, 1200 mA, 7.2W
Sewing Machine: 6 V DC, 1200 mA

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory lega l
rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction
manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable.
Neither can we hold responsible for material damage or personal injury caused by improper use if the
instruction manual is not properly executed. Damage to accessories does not mean free replacement of the
whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts
is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning,
maintenance or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT OPEN. DO NOT DISPOSE
OR IN FIRE OR SHORT CIRCUIT.
Manufactured by: Emerio B.V.
Zomervaart 1A, 2033 DA Haarlem, The Netherlands
Thread tension dial, thread guide
or thread pulling bar is too tight.
Thread is blocked by upper bobbin.
Upper thread is too loose.
Needle is bent or deformed.
- 14 -
Loosen the thread tension between 3-5
number.
Pull out the spool pin and make the
bobbin or thread run smoothly.
Remove and re-insert a new needle.