emerio SEW-121820.1 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5. Thread cutter
The machine has a thread cutter on the central left side of the machine, it can cut off the thread after sewing
or winding thread.
6. Sewing sleeves
This sewing machine has been designed to sew sleeves or any narrow openings in garment. Lift the presser
foot. Position the garment over the sewing arm. Lower the presser foot and follow the regular sewing
instructions.
7. Manual buttonhole
1) Pull the cloth under the presser foot and lower the presser foot on the cloth where you need to se w
buttonhole, then choose the 8
2) Turn on the switch and sew 5-6 stitches in low speed, then turn off the switch (Fig.15).
th
3) Choose the 7
stitch, turn on switch and sew on the cloth in suitable length, then turn off switch. Note
that try to keep sewed stitches in straight line (Fig.16).
th
4) Choose the 8
stitch, then turn on switch and sew 5-6 stitches in low speed, then turn off switch (Fig.17).
5) Raise the presser foot, rotating the cloth for 180° (Fig.18).
6) Choose the 7
th
stitch, then turn on switch and sew till buttonhole is fully sewed (Fig.19).
Fig.15
th
stitch.
Fig.16
- 9 -
Fig.17

Publicité

Table des Matières
loading

Table des Matières