Vertical Steam Ironing - Rowenta EXPERT PRESSURE IRON & STEAMER Mode D'emploi

6 • Vertical steam ironing
Set the iron temperature control and the
steam output control dial (located on the
control panel) to the maximum position.
Hang the garment on a coat hanger and hold
the fabric slightly taut with one hand. Press
repeatedly on the steam (fig.8) trigger
(beneath the iron handle) moving the iron
from top to bottom (fig.9).
As steam is very hot: never attempt to
remove creases from a garment while it
is being worn, always hang garments on a
coat hanger. For fabrics other than linen or
cotton, hold the iron a few centimetres from
the garment to avoid burning the fabric.
7 • Dry ironing
Do not press on the steam trigger.
8 • Fill the water tank again
When there is no more steam and the"Water
tank empty" light flashes: water tank is empty
(fig.10). Turn the unit off (see section
"Turning on and off") and unplug from outlet.
Open the water tank filler cover and fill with
maximum 33 oz of water.
Take care not to overfill the tank.
If this occurs, remove the excess water.
Close the water tank. Press on the on / off
switch (fig.4). Press the "Restart" button. The
expert pressure iron & steamer is ready to iron
when the steam ready indicator light is steady
green and the iron thermostat dial light has
gone out.
9 • Storing your expert pressure
iron & steamer
Turn the unit off (see section "Turning on and
off") and unplug from outlet. Place the iron on
the iron rest. Store the steam hose in its clip
and the electrical cord in its compartment.
Leave the iron to cool down for 1 hour before
putting it away if it is stored in a cupboard or
confined space.
8