Rowenta EXPERT PRESSURE IRON & STEAMER Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DESCRIPTION
1.
Iron handle
2.
Steam trigger
3.
Temperature control dial for iron
soleplate
4.
Iron rest
5.
Anytime refill water tank
6.
Water tank cover
7.
Iron temperature control light
8.
Boiler rinse cap cover / Boiler rinse cap
9.
Rinsing accessory
Due to the powerful steam output, a mesh type ironing board must be used to allow any
excess steam to escape and to avoid steam venting sideways.
BEFORE USE
Please read all of the instructions for use
and the Important Safeguards carefully.
Remove all packaging from the expert
pressure iron & steamer. It is normal for a
small amount of smoke and a light odor to
be produced the first time it is used. This
will quickly disappear.
1 • Water recommendations
Tap water
Rowenta irons are designed to be used with
REGULAR TAP WATER (up to 12 grains of
hardness). If your water is harder than this,
Rowenta recommends mixing half tap water
with half distilled water which reduces the
hardness; or just use inexpensive bottled
spring water. Never use 100% distilled water
as this can cause the iron to spit and leak.
Softened water
There are many types of household water
softeners and the water from many of them is
perfectly acceptable for use in the expert
pressure iron & steamer. However, some types
of softeners, particularly those that use
chemicals such as salt, can cause the
appliance to leak or spit during use. If you
experience
this
recommend that you try using inexpensive
bottled spring water or untreated tap water.
Once you have changed water it will take
several uses to correct the problem. Rowenta
recommends trying the steam function for the
first time on an old towel or cloth that can be
discarded to avoid damaging your clothes.
6
type
of
problem,
10.
Steam hose
11.
Steam hose storage clip
12.
Control panel
a.
Illuminated on / off switch
b.
"Steam ready" light
c.
Variable steam control dial
d.
"Restart" button
e.
"Boiler rinse" light
f.
"Water tank empty" light
13.
Power cord
Iron and other impurities
If your water supply contains large amounts of
iron or organic matter, these minerals can
collect inside the appliance and eventually
appear as brown stains. If you experience
these problems Rowenta recommends using
inexpensive bottled spring water.
Never use 100% pure distilled water.
Always remember :
Battery water and water containing additives
(such as starch, perfume or fabric conditioner)
may not be used. Such additives can affect the
properties of the steam and at high temperatures
can form deposits in the steam chamber which
will mark the laundry when they are emitted
through the steam vents.
Descaling liquids/agents should not be used.
2 • Filling the expert pressure
iron & steamer
The expert pressure iron and steamer is
designed to operate using tap water. (Fig. 1).
While unplugged, place the pressure iron &
steamer on a stable, heat resistant surface.
Open the water tank cover. fill the the tank
with a maximum of 33 oz. of water, taking care
we
not to overfill. close the water tank cover.
Completely unwind the power cord and steam
hose. (fig. 2)
The water tank can be filled at any time
during use. when refilling take care not to
overfill the tank.

Publicité

Table des Matières
loading

Table des Matières