Aux Input; Sleep Function; Timer Function - auna 10032044 Mode D'emploi

AUX INPUT

There is a 3.5mm AUX IN jack located at the back of the unit, analogue audio
sound signals from other sources can be input to the unit through this jack.
1. Connect the input to other analogue audio source via a cable with 3.5mm
jack.
2. Repeatedly press the STANDBY/FUNC button until the display shows
"Aux".
3. Adjust the volume control for your desired sound output level.

SLEEP FUNCTION

This function allows you to program the unit to switch off itself after a set
period of time. You can set your sleep time during unit operation:
1. Repeatedly press the SLEEP/ TIMER button to select the sleep time, it
will change in sequence on every press: 15 > 30 > 45 > 60 > 90 > Off > 15
> 30 > ....
2. When the display shows your desired sleep time, release the button, the
sleep timer is now activated and the display will show the elasped sleep
time. When the sleep time counts to zero, the unit will go off.
3. To cancel sleep sooner, repeatedly press the SLEEP/ TIMER button until
the display shows "Off".

TIMER FUNCTION

This function allows you to program the unit to switch on itself at your
desired operation mode and time.
1. To set the on timer clock, ensure the unit is in standby, press and hold
the SLEEP/TIMER button until the display shows the timer icon and the
on timer clock. The "hour" digit of the timer clock will flash.
2. Press the TUNE- or TUNE+ button to set to the desired hour, then press
the SLEEP/ TIMER button to confirm, first set the hour and finally the
minute, the on timer clock is set.
3. Then you will enter into the timer on mode setting, press the TUNE- or
TUNE+ button to select DAB/FM/CD/USB/AUX followed by pressing the
SLEEP/ TIMER button to confirm.
4. To activate timer and select time on mode, during unit standby,
repeatedly press the SLEEP/ TIMER button, the display will show in
sequence on every press: Timer Off > Timer On Mode: DAB > FM > CD >
EN
33