Listening To Cassette Tapes; Usb Mp3 Playback - auna 10032044 Mode D'emploi

EN
32
sequence.

LISTENING TO CASSETTE TAPES

This unit incorporates a cassette tape player, you can play the songs/ music
in your cassette tapes.
To select the cassette mode, repeatedly press on the STANDBY/FUNC
button until "Tape" is displayed. The cassette control buttons are located at
the bottom front of the unit under the cassette door.
1. Press the STOP/EJ button to open the cassette door.
2. Insert the cassette tape into the cassette player and close the door
firmly.
3. Press firmly on the PLAY button to start playback.
4. To interrupt playback, press firmly on the PAUSE button.
5. To resume playback during pause, press firmly on the PAUSE button
again.
6. To fast forward or rewind the tape, press firmly on the F.FWD or REWIND
button.
7. To stop playback, press on the STOP/EJ button once.
8. To open the cassette door during stop, press on the STOP/EJ button
once.
9. To open the cassette door during playback, press on the STOP/EJ button
twice

USB MP3 PLAYBACK

1. To select USB mode, repeatedly press the STANDBY/FUNC button until
the display shows "USB".
2. Insert your USB device to the USB port, the display will first show
"Reading" and finally the total number of folders and tracks.
3. It will automatically playback from the first folder and track, the display
will show the folder/track number and the play time.
4. To interrupt playback, press the PLAY/PAUSE button, the play time in the
display will flash.
5. To resume playback, press the PLAY/PAUSE button again.
6. To play the next file/track, press the TUNE+ button once.
7. To play the current playing file/track again from the beginning, press the
TUNE- button once.
8. To play the previous file/track, press the PLAY/PAUSE button twice.
9. To select different folder in the device, press and hold the PRESET/
CLOCK SET button.
10. To stop playback, press the STOP button.