auna 10032044 Mode D'emploi page 29

Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled
and transmitted together in a single frequency. There are national and local
multiplexes, local ones contain stations that are specific to that area.
Frequency
The frequency of the present station will be displayed.
Signal error
This is displayed as a number between 0-99. It would not be possible to
satisfactorily listen to a radio station with a signal error rate of 30 or above.
Try adjusting the aerial or relocating your radio to improve reception.
Audio bit rate
The display will show the digital audio bit rate being received.
Time
The display will show current time "XX : XX : XX " (hours: minutes: seconds).
Date
The display will show current time "XX : XX : XX " (date: month: year).
FM RADIO
1. To select FM, repeatedly press the STANDBY/FUNC button until the
display shows "FM". The display will show the frequency and the RDS
info if available (repeatedly press the INFO/MENU button to go through
the RDS infos)
2. To activate manual tuning, repeatedly press the TUNE- or TUNE+ button,
when your desired frequency appears in the display, release the buttons.
3. To activate auto scan for stations, press and hold the SCAN button, the
display will show "Scanning ..." and a progressing slide bar, and it will
stop automatically once a station has been found.
FM stereo
Press "FM ST." button to select FM MONO or stereo( AUTO).
FM display modes
In FM mode, every time you press the INFO/MENU button, the display will
cycle through the following display modes:
Mono/Auto (FM ST.) > Radio text > Radio name > PTY > Time > Date > ...
EN
29