System Settings - auna 10032044 Mode D'emploi

EN
26
4. The display will show the Year with the XXXX digits flash, press the
TUNE- or TUNE+ button to the correct YEAR followed by pressing the
PRESET/CLOCK SET button to confirm. Then press the TUNE- or TUNE+
button to the correct MONTH and DATE, Set date format : DD-MM-YYYY
5. When the display shows the correct date, finally press the PRESET/
CLOCK SET button again to confirm, and the clock setting is now
completed.

SYSTEM SETTINGS

You can enter into the System menu in either DAB or FM mode - first press
and hold the INFO/MENU button to enter into the menu, then repeatedly
press the TUNE- or TUNE+ button followed by pressing the SELECT/ALBUM
button to select "System".
Inside the "System", you can select the following sub menus: Language/
Factory Reset / SW version
To enter into the sub menus, repeatedly press the TUNE- or TUNE+ button
followed by pressing the SELECT/ALBUM button to confirm.
To step back through the menu to the station display, press and hold the
INFO/MENU again and then release.
Language
You can change the language of your radio, there are 4 options available:
English / French / Dutch / Italian.
Factory Reset
You can reset your radio and restore all of the original factory settings.
To perform factory reset, select <Yes> inside the "Factory Reset" menu, the
unit will switch to DAB mode and perform auto scan function, the display
will show"Scanning ...", and after the reset is completed, the unit will stay in
DAB mode.
Note: All of your stored DAB & FM presets will be deleted once the reset
has taken place.
SW version
The SW version will be displayed and you may wish to take a note here.