Using B's Clip5 - Panasonic LF-M621U Mode D'emploi

ENGLISH

Using B's CLiP5

B's CLiP5
B's CLiP5 uses the format known as packet writing to write data in files to CD-RW and DVD-RW discs.
It is possible to use CD-RW and DVD-RW discs in the same manner as floppy discs and DVD-RAM to
transfer, save and erase files.
Save files to the same disc as many times as you like
You can write file(s) to disc as was not possible previously with pre-mastering software. You can add
data as many times as you wish until the disc becomes full.
Has the same easy to use feel as FDD/MO
Allows you to copy files and folder just by dragging and dropping using Explorer in much the same way
as with FDD and MO. Of course, it is easy also to erase files and folders in the same way.
Completely compatible with RW discs
Completely compatible with the special characteristics of CD-RW and DVD-RW discs so that the avail-
able space on the disc increases if you delete files.
Comes with Verifier function
Comes with the Verifier function which inspects a disc that has been written to verify that data has been
correctly recorded. By using this function it is possible to obtain data storage with a very high level of
reliability.
Completely compatible with UDF (Universal Disk Format) World Standard
Version 1.5
B's CLiP5 is completely adapted to file format world standard UDF (Universal Disk Format) Version
1.5. So you can rest assured that this system will retain its effectiveness in the future.
Operating requirements for B's CLiP5
Your computer must meet the following requirements to use this software.
Computer
OS
CPU
Memory size
Hard disk space
Display
98
IBM PC/AT compatible computer
Windows 98/Me/2000/XP
Pentium II 300 MHz or more
32 MB or more
5 MB or more
800 × 600 dots or more, high color (16 bits) or more
DVD-RW
CD-RW