Identification - Nameplate (Fig. 3); Transportation (Fig. 4); Receipt And First Cleaning; Installation And Environmental Conditions (Fig. 4) - Arneg Sapporo VCA Mode D'emploi

Sapporo
English
The weight of water vapor in dry air is one of the main points that affect the performance and
power consumption of the cabinets
Declaration of A copy of the conformity statement is annexed to the cabinet
conformity
If you lose the original copy of the Declaration of Conformity supplied with
the cabinet, download a copy by filling out the form available on the internet
addresses:
- for Italy: http://www.arneg.it/conformita/it
- overseas: http://www.arneg.it/conformita/en

5. Identification - Nameplate (Fig. 3)

The technical nameplate is situated on the back of the cabinet with all the technical characteristics:
1 Manufacturer's name and address
2 Name and length of the cabinet
3 Cabinet code number
4 Cabinet registration number
5 Power supply voltage
6 Power supply frequency
7 Max. absorbed current
8 Electric power absorbed at steady state during refrigerating phase (compressors + fans + hot
cables)
9 Electric power absorbed at steady state during defrosting phase (hot cables + evaporator fan)
10 Illuminating power (where applicable)
11 Useful display surface
12 Useful loading volume
13 Type of refrigerating gas used in the appliance
14 Environmental climatic class and reference temperature
15 Class of protection against humidity
16 Manufacturing job number of the cabinet
17 Manufacturing order number of the cabinet
18 Manufacturing year of the cabinet
In case of technical service request, please communicate the following information for the
identification of the cabinet:
- product name
- registration number(Fig. 3 - 4);
- job number

6. Transportation (Fig. 4)

The cabinet is fitted with a wooden support fixed to the base for handling by means of fork-lifts.
Use a manual or electric lift truck suited for raising the cabinet in question.

7. Receipt and first cleaning

Upon receipt of the cabinet:
- Make sure that the packaging is intact and that it is not evidently damaged;
- Unpack the cabinet with care so as not to damage the cabinet itself;
- Check each single part of the cabinet making sure that all its components are intact;
- If anything is found to be damaged, immediately call the supplying company;
- Proceed with a first cleaning using neutral products, dry with a soft cloth, do not use abrasive sub-
stances or metal sponges, do not use alcohol or similar to clean parts in methacrylate (Plexiglas).
For correct packaging disposal, remember that it contains:
Wood - Polystyrene - Polythene - PVC - Carton.
In compliance with EEC Directive 94/62 we hereby approve the materials above.

8. Installation and environmental conditions (Fig. 4)

For installation, follow the instructions below:
- Do not position the cabinet:
in places containing explosive gaseous substances;
the open air and, therefore, exposed to atmospheric agents;
22
(Fig. 3 - 2);
(Fig. 3 - 18).
05050688 05 05/08/2015