Reinstall Bottom Panel - Best CP45I Serie Guide D'installation

17. PERFORM THE EXTERNAL BLOWER CONNECTIONS (CP47E SERIES ONLY)
Do not plug the two cords together.
To install the blower see instructions included with the blower.
Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector
inside the power pack (A) and the 2-prong male connector cord from rough-in
plate to the 2-prong plug inside the power pack (B).

18. REINSTALL BOTTOM PANEL

Lift the bottom panel and engage the power pack metal tabs in
bottom panel slots, as shown in details A and B below.
A
HO0121
19. REINSTALL GREASE DRIP RAIL
A. Insert one end of grease rail in power pack side ()
while lifting the other end over the bottom panel
edge ().
B. Center the grease drip rail over the bottom panel
edge and flip it to snap in place.
WARNING
!
S
IDE VIEW
B
HE0078
Secure the bottom panel to the power pack using its screws
previously removed in step 7.
A


HD0292
12
B A
R
ETAINING SCREW LOCATIONS
HO0119
HD0291
B