Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11. INSTALL THE DECORATIVE FLUE (
N
-
:
ON
DUCTED INSTALLATION
Slide up the upper flue until it is aligned with the plenum. Secure the upper flue to the
plenum using 2 M4 x 12 Phillips round head screws.
Remove protective plastic film covering the upper flue and the hood.
D
:
UCTED INSTALLATION
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be
inside the flue. Secure the upper flue to its bracket using 2 M4 x 12 Phillips round head
screws.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue and the hood.
12. REINSTALL GREASE FILTERS
N
-
:
ON
DUCTED INSTALLATION
Install a charcoal filter on each aluminum grease filter back (A). Hold the
charcoal filter in place by inserting both ends of the 3 metal strips in each
aluminum grease filter frame (B).
A
:
LL INSTALLATIONS
To reinstall the grease filters, align rear filter tabs with slots in the hood.
Push each filter into position. Make sure filters are securely engaged after
installation.
)
CONTINUED
A
HA0147
HD1270
9
HO0293
U
PPER FLUE MOUNTING BRACKET
F
RONT VIEW
U
PPER
FLUE
HO0292
B
Publicité
Table des Matières
